Grid
Class: NodeImageToGrid
Generates a grid in the attached image space. This can be useful to evaluate registrations and deformation, or to illustrate scale.
Example workflows
Inputs
Image
An image which serves as a reference space for the grid.
Type: Image4DFloat, Required, Single
Outputs
Grid
The grid image.
Type: Image4DFloat
Settings
Sigma Number
The standard deviation of the low pass filter applied to the grid. Must be larger than 0.
Value Number
The voxel value in spaces between grid lines. The value in the grid lines is always 0.
Offset X (mm) Number
Offset in mm of the first grid line in X-direction. Offset can be negative, but the grid is not generated further than the extent of the original image so this is not recommended.
Offset Y (mm) Number
Offset in mm of the first grid line in Y-direction. Offset can be negative, but the grid is not generated further than the extent of the original image so this is not recommended.
Offset Z (mm) Number
Offset in mm of the first grid line in Y-direction. Offset can be negative, but the grid is not generated further than the extent of the original image so this is not recommended.
Spacing X (mm) Number
Spacing in mm between center of grid lines in X-direction.
Spacing Y (mm) Number
Spacing in mm between center of grid lines in Y-direction.
Spacing Z (mm) Number
Spacing in mm between center of grid lines in Z-direction.
References
See also
Keywords:
Copyright © 2022, NONPI Medical AB